Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-TSSOP, SC-88, SOT-363 |
Number of Pins |
6 |
Weight |
2.494758mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLV7211 |
Pin Count |
6 |
Output Type |
Push-Pull |
Number of Elements |
1 |
Nominal Supply Current |
14μA |
Output Current |
30mA |
Max Supply Current |
7μA |
Propagation Delay |
10 μs |
Quiescent Current |
18μA |
Response Time |
10000 ns |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~15V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
4e-8μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
40 fA |
Input Bias Current |
40 fA |
Current - Quiescent (Max) |
18μA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.04pA @ 5V |
CMRR, PSRR (Typ) |
75dB CMRR, 80dB PSRR |
Height |
1.1mm |
Length |
2mm |
Width |
1.25mm |
Thickness |
900μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV7211AIDCKR Overview
The product is packaged in 6-TSSOP, SC-88, SOT-363 in order to facilitate transportation.The comparator has a type Push-Pull output.We ship the part through Tape & Reel (TR) .There are6 terminals on the comparator.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .This is a 1 element comparator.There are 6 pins on this board.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.There are 6 pins on the comparator.In order to find a solution that meets your specific needs, search TLV7211 for more pin-to-pin solutions.There is 18μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normal operation of the device requires a nominal supply current of 14μA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 7μA .Input current to the device is limited to 40 fA .Comparator electronics follows that the voltage gain of the part is 100dB .Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
TLV7211AIDCKR Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211AIDCKR Applications
There are a lot of Texas Instruments TLV7211AIDCKR linear comparators applications.
- Battery-Powered Electronics
- Ultra-Low Power Systems
- Wide Range VCO; MOS Clock Timers
- Wearable Devices
- Mobile Phones and Tablets
- Mobile Communications
- Appliances
- Window Comparators
- Portable and Battery-Powered Systems
- Mobile Phones