TLV7211AIDCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV7211 |
| Pin Count | 6 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 7μA |
| Output Current | 30mA |
| Max Supply Current | 7μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 18μA |
| Response Time | 10000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Current - Quiescent (Max) | 18μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV7211AIDCKT Overview
A convenient transport package is provided in 6-TSSOP, SC-88, SOT-363 .This comparator is of the Push-Pull output type.This chip is designed with the Tape & Reel (TR) package.As you can see, the comparator has6 terminals.The electrical component in this case belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .Electronic comparator consists of 1 elements in total.The board includes 6 pins.Electronic comparator is recommended that the mounting type be Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.6 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search TLV7211 .As a result, this comparator displays a quiescent current of 18μA .The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 7μA for normal use.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 7μA .You are allowed to input a maximum current of 40 fA into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.With a TR package, this device is designed for general use (usually in ADC circuits).
TLV7211AIDCKT Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211AIDCKT Applications
There are a lot of Texas Instruments TLV7211AIDCKT linear comparators applications.
- Automotive
- Mobile Phones
- Handheld Instruments
- System control and monitoring
- Battery management and protection
- Self-diagnostics
- Factory automation & control
- Motor drives
- Mobile Communications
- Multivibrators and High-Voltage Digital Logic Gates
