Parameters |
Output Type |
Push-Pull |
Number of Elements |
1 |
Nominal Supply Current |
7μA |
Output Current |
30mA |
Max Supply Current |
7μA |
Propagation Delay |
10 μs |
Quiescent Current |
18μA |
Response Time |
10000 ns |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~15V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
100dB |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
40 fA |
Input Bias Current |
40 fA |
Current - Quiescent (Max) |
18μA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.04pA @ 5V |
CMRR, PSRR (Typ) |
75dB CMRR, 80dB PSRR |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLV7211 |
Pin Count |
8 |
TLV7211AIDR Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.There is a comparator of type Push-Pull output on this device.The chip is packaged with Tape & Reel (TR) .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 1 elements in total.A total of 8 pins are included.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.Electronic comparator has 8 pins.Alternatively, you may search for TLV7211 to find more pin-to-pin solutions for your specific needs.There is 18μA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Electronic comparator is recommended that the nominal supply current for the device be set to 7μA .Current supply exceeding 7μA could cause disfunction of the compartator.Electronic comparator is possible to input a maximum of 40 fA current into the device.Based on the voltage formula, the voltage gain of the part is 100dB .Comparator electronics is acceptable to pack the device by TR .
TLV7211AIDR Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211AIDR Applications
There are a lot of Texas Instruments TLV7211AIDR linear comparators applications.
- General-Purpose Portable Devices
- Zero-Crossing Detectors
- Limit Comparators
- Appliances
- Self-diagnostics
- Consumer Medical Electronics
- High-Speed Sampling Circuits
- Alarm and Monitoring Circuits
- Window Comparators, Multivibrators
- Lithium ion battery monitoring