TLV7211ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV7211 |
| Pin Count | 8 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 14μA |
| Output Current | 30mA |
| Max Supply Current | 7μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 18μA |
| Response Time | 10000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Current - Quiescent (Max) | 18μA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV7211ID Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.There is a Push-Pull output type for this comparator.This chip is designed with the Tube package.You can find 8 terminals of the comparator.Electronic comparator is a part of Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 1 elements in total.The device is equipped with 8 pins.Surface Mount universial mout for easy adapting.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator consists of 8 pins.Alternatively, you may search for TLV7211 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 18μA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 14μA in order to use the device normally.A current supply greater than 7μA may result in the comparator malfunctioning.You can input a maximum current of 40 fA into this device.Based on the voltage formula, the voltage gain of the part is 100dB .
TLV7211ID Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211ID Applications
There are a lot of Texas Instruments TLV7211ID linear comparators applications.
- Notebooks and PDAs
- Mobile Phones and Tablets
- Threshold Detectors
- Battery management and protection
- System control and monitoring
- Hand-Held Electronics
- Ultra-Low Power Systems
- High-Speed Sampling Circuits
- Simple Analog-to-Digital Converters (ADCs)
- Zero-Crossing Detectors
