Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
15.790684mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLV7211 |
Pin Count |
5 |
Output Type |
Push-Pull |
Number of Elements |
1 |
Nominal Supply Current |
14μA |
Output Current |
30mA |
Max Supply Current |
7μA |
Propagation Delay |
10 μs |
Quiescent Current |
18μA |
Response Time |
10000 ns |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~15V |
Input Offset Voltage (Vos) |
15mV |
Voltage Gain |
100dB |
Average Bias Current-Max (IIB) |
4e-8μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
40 fA |
Input Bias Current |
40 fA |
Current - Quiescent (Max) |
18μA |
Voltage - Input Offset (Max) |
15mV @ 5V |
Current - Input Bias (Max) |
0.04pA @ 5V |
CMRR, PSRR (Typ) |
75dB CMRR, 80dB PSRR |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV7211IDBVR Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .There is a comparator of type Push-Pull output on this device.The part is shipped by Tape & Reel (TR) .There are5 terminals on the comparator.The electrical component in this case belongs to the Comparator families.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as General Purpose .This is a 1 element comparator.Electronic comparator has 5 pins.Electronic comparator is recommended that the mounting type be Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator has a pin count of 5 .Search TLV7211 to find more pin-to-pin solutions.In this comparator, the quiescent current is 18μA .There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 14μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 7μA .Electronic comparator is possible to input a maximum of 40 fA current into the device.From the voltage formula, the voltage gain of the part is 100dB .With a TR package, this device is designed for general use (usually in ADC circuits).
TLV7211IDBVR Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211IDBVR Applications
There are a lot of Texas Instruments TLV7211IDBVR linear comparators applications.
- Limit Comparators
- Window Comparators, Multivibrators
- Building automation
- High-Speed Differential Line Receiver
- Threshold Detectors
- Industrial
- Wide Range VCO; MOS Clock Timers
- Portable Battery Monitoring
- Window Comparators
- Infotainment & cluster