TLV7211IDCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV7211 |
| Pin Count | 6 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 7μA |
| Output Current | 30mA |
| Max Supply Current | 7μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 18μA |
| Response Time | 10000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Current - Quiescent (Max) | 18μA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV7211IDCKR Overview
To facilitate transportation, it comes packaged in 6-TSSOP, SC-88, SOT-363 .Output type Push-Pull is used for this comparator.This device is designed in Tape & Reel (TR) case.As you can see, the comparator has6 terminals.The electrical component in this case belongs to the Comparator families.With a 5V voltage supply, the comparator can perform multiple demanding tasks.When it comes to types, this comparator is a typical General Purpose .There are a total of 1 elements in it.Electronic comparator includes 6 pins.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 6 pins.If you require more pin-to-pin solutions, search TLV7211 for more options.The comparator presents a quiescent current of 18μA volts.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 7μA in order to use the device normally.A supply current exceeding 7μA may result in the comparator malfunctioning.Electronic comparator is possible to input up to 40 fA current into the device.From the voltage formula, the voltage gain of the part is 100dB .Comparator electronics is acceptable to pack the device by TR .
TLV7211IDCKR Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211IDCKR Applications
There are a lot of Texas Instruments TLV7211IDCKR linear comparators applications.
- Alarm and Monitoring Circuits
- Set Top Boxes
- Motor drives
- Notebooks and PDAs
- Mobile Phones and Tablets
- Point of load regulators
- Window Comparators
- General-Purpose Portable Devices
- Portable Battery Monitoring
- Consumer Medical Electronics
