TLV7211IDCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLV7211 |
| Pin Count | 6 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Nominal Supply Current | 7μA |
| Output Current | 30mA |
| Max Supply Current | 7μA |
| Propagation Delay | 10 μs |
| Quiescent Current | 18μA |
| Response Time | 10000 ns |
| Common Mode Rejection Ratio | 75 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 4e-8μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Input Bias Current | 40 fA |
| Current - Quiescent (Max) | 18μA |
| Voltage - Input Offset (Max) | 15mV @ 5V |
| Current - Input Bias (Max) | 0.04pA @ 5V |
| CMRR, PSRR (Typ) | 75dB CMRR, 80dB PSRR |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV7211IDCKT Overview
In order to facilitate transportation, it is packaged in 6-TSSOP, SC-88, SOT-363 .This comparator is of the Push-Pull output type.We ship the part through Tape & Reel (TR) .6 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .This is a 1 element comparator.Electronic comparator has 6 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has 6 pins.You may wish to search TLV7211 for more solutions that address your specific needs.A quiescent current of 18μA is displayed by this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current of the device be 7μA .A current supply greater than 7μA may cause the comparator to malfunction.Electronic comparator is possible to input up to 40 fA current into the device.Based on the voltage formula, the voltage gain of the part is 100dB .The device is packaged in TR and is often used in ADC circuits.
TLV7211IDCKT Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211IDCKT Applications
There are a lot of Texas Instruments TLV7211IDCKT linear comparators applications.
- Automotive
- Window Comparators
- Point of load regulators
- Current and voltage sensing
- System control and monitoring
- Lithium ion battery monitoring
- Factory automation & control
- Zero-Crossing Detectors
- Mobile Communications
- Infotainment & cluster
