TLV7211IDG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 8 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 7μA |
| Max Supply Current | 7μA |
| Current - Output | 30mA |
| Propagation Delay | 10 μs |
| Quiescent Current | 18μA |
| Response Time | 4 μs |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 40 fA |
| Input Offset Voltage (Vos) | 15mV |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Input Current | 40 fA |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLV7211IDG4 Overview
For convenience, it is packaged in SOIC .Ready for shipping in Rail/Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.There are 8 pins on this board.This comparator has 8 pins.There is a quiescent current of 18μA in this comparator.There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be 7μA .If the current supply exceeds 7μA , the comparator might be damaged.There is a maximum current that can be input into the device of 40 fA .From the voltage formula, the voltage gain of the part is 100dB .Comparator electronics is not recommended to operate at a temperature higher than 85°C .A temperature lower than -40°C is unsuitable for the device.15V is the maximum supply voltage of the comparator.Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as 2.7V .For the output to be of high quality, 1 channels must cooperate together.Comparator electronics has a rating of 30mA output current.
TLV7211IDG4 Features
General Purpose IC
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211IDG4 Applications
There are a lot of Texas Instruments TLV7211IDG4 linear comparators applications.
- Zero-Crossing Detectors
- Automatic Test Equipment
- Mobile Communications
- Analog front end
- Limit Comparators
- Window Comparators, Multivibrators
- Infotainment and Clusters
- Mobile Phones
- DC/DC and AC/DC power supplies
- Battery management and protection
