Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 23 hours ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLV7211 |
Pin Count |
8 |
Output Type |
Push-Pull |
Number of Elements |
1 |
Nominal Supply Current |
14μA |
Output Current |
30mA |
Max Supply Current |
7μA |
Propagation Delay |
10 μs |
Quiescent Current |
18μA |
Response Time |
10000 ns |
Common Mode Rejection Ratio |
75 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~15V |
Input Offset Voltage (Vos) |
15mV |
Voltage Gain |
100dB |
Power Supply Rejection Ratio (PSRR) |
80dB |
Max Input Current |
40 fA |
Input Bias Current |
40 fA |
Current - Quiescent (Max) |
18μA |
Voltage - Input Offset (Max) |
15mV @ 5V |
Current - Input Bias (Max) |
0.04pA @ 5V |
CMRR, PSRR (Typ) |
75dB CMRR, 80dB PSRR |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV7211IDR Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.There is a comparator of type Push-Pull output on this device.As a result, it is designed with Tape & Reel (TR) package.The comparator has 8 terminals.The electrical component here belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .There are a total of 1 elements in it.The board includes 8 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.This comparator has 8 pins.You can search TLV7211 if you are looking for more pin-to-pin solutions.In this comparator, the quiescent current is 18μA .The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires a nominal supply current of 14μA .If the current supply exceeds 7μA , the comparator might be damaged.The maximal current your can input into the device is 40 fA .In accordance with the voltage formula, the part's voltage gain is 100dB .Comparator electronics is acceptable to pack the device by TR .
TLV7211IDR Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 18μA
Voltage Gain: 100dB
TLV7211IDR Applications
There are a lot of Texas Instruments TLV7211IDR linear comparators applications.
- Window Comparators
- Mobile Phones and Tablets
- Alarm and Monitoring Circuits
- High-Speed Differential Line Receiver
- Building automation
- System control and monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Wide Range VCO; MOS Clock Timers
- Window Comparators
- Window Comparators, Multivibrators