TLV7256IDDUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Number of Pins | 8 |
| Weight | 4.309128mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 200mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TLV7256 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Nominal Supply Current | 60μA |
| Power Dissipation | 200mW |
| Output Current | 35mA |
| Max Supply Current | 51μA |
| Propagation Delay | 680 ns |
| Quiescent Current | 70μA |
| Response Time | 30 ns |
| Common Mode Rejection Ratio | 65 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 88dB |
| Average Bias Current-Max (IIB) | 0.000004μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 4pA |
| Input Bias Current | 4pA |
| Current - Quiescent (Max) | 70μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 4pA @ 5V |
| CMRR, PSRR (Typ) | 65dB CMRR |
| Current - Output (Typ) | 35mA @ 5V |
| Height | 900μm |
| Length | 2.3mm |
| Width | 2mm |
| Thickness | 850μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV7256IDDUR Overview
In order to make transportation easier, it is packaged in 8-VFSOP (0.091, 2.30mm Width) .Output type CMOS, Push-Pull, TTL is used for this comparator.We ship the part through Tape & Reel (TR) .The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 1.8V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 2 elements in total.As a result, it contains 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.8 pins are available on the comparator.Try search TLV7256 to get more pin-to-pin solutions for your special needs.This comparator presents a quiescent current of 70μA .The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 60μA .If the current supply exceeds 51μA , the comparator could malfunction.You are allowed to input a maximum current of 4pA into the device.The voltage formula shows that the part has a voltage gain of 88dB .The operating supply voltage for normal operation should be 3V .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLV7256IDDUR Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 70μA
Voltage Gain: 88dB
TLV7256IDDUR Applications
There are a lot of Texas Instruments TLV7256IDDUR linear comparators applications.
- Window Comparators
- Infotainment and Clusters
- Handheld Instruments
- Laptop Computers
- Power Supervision
- Alarm and Monitoring Circuits
- High-Speed Differential Line Receiver
- Factory automation & control
- Window Comparators
- Power management
