Parameters |
Mount |
Surface Mount |
Package / Case |
VSSOP |
Number of Pins |
8 |
Weight |
4.309128mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Comparator |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
1.8V |
Terminal Pitch |
0.5mm |
Pin Count |
8 |
Output Type |
TTL |
Operating Supply Voltage |
3V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
2 |
Max Supply Voltage |
5V |
Min Supply Voltage |
1.8V |
Power Dissipation-Max |
200mW |
Nominal Supply Current |
51μA |
Power Dissipation |
200mW |
Max Supply Current |
51μA |
Current - Output |
35mA |
Propagation Delay |
680 ns |
Quiescent Current |
70μA |
Response Time |
60 ns |
Common Mode Rejection Ratio |
65 dB |
Current - Input Bias |
4pA |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
88dB |
Height Seated (Max) |
0.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TLV7256IDDURG4 Overview
To facilitate transportation, it comes packaged in VSSOP .There is a TTL output type for this comparator.This package has been designed with Tape and Reel .Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 1.8V voltage.Electronic comparator can be classified as a General Purpose chip.The device is equipped with 8 pins.Electronic comparator has 8 pins.There is a quiescent current of 70μA in this comparator.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 51μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 51μA .The voltage formula shows that the part has a voltage gain of 88dB .An increase in temperature over 85°C is not recommended.A temperature lower than -40°C is unsuitable for the device.The comparator has a maximum supply voltage of 5V .This comparator allows minimum supply voltage of 1.8V .For the output to be of high quality, 2 channels must cooperate together.Normal operation requires 3V operating supply voltage.35mA is the output current of this device.
TLV7256IDDURG4 Features
TTL output capability
General Purpose IC
Quiescent Current: 70μA
Voltage Gain: 88dB
TLV7256IDDURG4 Applications
There are a lot of Texas Instruments TLV7256IDDURG4 linear comparators applications.
- Threshold Detectors
- System control and monitoring
- Window Comparators
- Limit Comparators
- DC/DC and AC/DC power supplies
- Power management
- Infotainment and Clusters
- Automotive
- Body Control Modules
- Notebooks and PDAs