Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Surface Mount |
YES |
Number of Pins |
3 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2V |
Terminal Pitch |
0.96mm |
Base Part Number |
TLV803 |
Output |
Open Drain or Open Collector |
Pin Count |
3 |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
1.1V |
Operating Supply Current |
20μA |
Nominal Supply Current |
30μA |
Max Supply Current |
30μA |
Adjustable Threshold |
NO |
Quiescent Current |
9μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
4.38V |
Number of Voltages Monitored |
1 |
Reset Timeout |
120ms Minimum |
Min Reset Threshold Voltage |
4.28V |
Max Reset Threshold Voltage |
4.48V |
Threshold Voltage |
+4.38V |
Height |
1.22mm |
Length |
2.92mm |
Width |
1.3mm |
Thickness |
1mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV803MDBZR Overview
This power management consists of 3 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. This power management is made up of 1 channels which are available in a series format. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 2V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. The power management belongs to the Power Management Circuits subcategory. 3 pins are present in total in this power management. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 20μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TLV803, which is the base power ics number. At most, voltage supervisor can operate at a supply temperature of 30μA.
TLV803MDBZR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current
TLV803MDBZR Applications
There are a lot of Texas Instruments TLV803MDBZR Voltage Supervisors applications.
- Power communication system
- Battery cars
- Magnetic resonance imaging
- Analog circuit
- Automotive permanent magnet synchronous motors
- Set top box
- Efficient information transmission
- Power distribution systems of CCU
- Detection of phase loss
- Refrigeration