TLV803MDBZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.96mm |
| Base Part Number | TLV803 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 30μA |
| Max Supply Current | 30μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 4.28V |
| Max Reset Threshold Voltage | 4.48V |
| Threshold Voltage | +4.38V |
| Height | 1.22mm |
| Length | 2.92mm |
| Width | 1.3mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV803MDBZT Overview
As you can see, this power management is mounted through 3 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When 2V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. 3 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supply current of the power management is 20μA. You can always use TLV803, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 30μA.
TLV803MDBZT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current
TLV803MDBZT Applications
There are a lot of Texas Instruments TLV803MDBZT Voltage Supervisors applications.
- Power distribution systems of CCU
- emergency room
- Functional modules
- Military communications
- Electric heating appliances
- Radio
- Rechargeable batteries
- Automotive power systems
- Kitchen appliances
- Medical-specific insulation monitor
