TLV803SDBZT
| Parameters | |
|---|---|
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 20μA |
| Nominal Supply Current | 30μA |
| Max Supply Current | 30μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.87V |
| Max Reset Threshold Voltage | 2.99V |
| Threshold Voltage | +2.93V |
| Height | 1.22mm |
| Length | 2.92mm |
| Width | 1.3mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.96mm |
| Base Part Number | TLV803 |
| Output | Open Drain or Open Collector |
TLV803SDBZT Overview
There are 3 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. It is possible to find on this power management a series of 1 channels. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 2V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. Pin count of the power management is 3. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. Supplied with a operating current of 20μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to TLV803, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 30μA.
TLV803SDBZT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current
TLV803SDBZT Applications
There are a lot of Texas Instruments TLV803SDBZT Voltage Supervisors applications.
- Consumer electronics
- Data storage applications
- Medical-specific insulation monitor
- Microprocessor system
- Radar
- Military communications
- Battery cars
- Leakage protection
- Medical-specific isolation transformer
- Transformer load monitoring equipment
