TLV809J25DBZR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.96mm |
| Base Part Number | 809J25 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Operating Supply Voltage | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.25V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.2V |
| Max Reset Threshold Voltage | 2.3V |
| Threshold Voltage | +2.25V |
| Height | 1.22mm |
| Length | 2.92mm |
| Width | 1.3mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV809J25DBZR Overview
There are 3 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 3. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. It is always advisable to use 809J25, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 25μA.
TLV809J25DBZR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
TLV809J25DBZR Applications
There are a lot of Texas Instruments TLV809J25DBZR Voltage Supervisors applications.
- Efficient information transmission
- Battery cars
- Detection of phase loss
- Display equipment
- Linux and server computing
- Transformer load monitoring equipment
- Satellite navigation
- External alarm
- Urban rail transit weak current power monitoring
- Cloud computing
