TLV809K33DBZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.96mm |
| Base Part Number | 809K33 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 25μA |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.87V |
| Max Reset Threshold Voltage | 2.99V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.87V |
| Overvoltage Threshold | 2.99V |
| Height | 1.22mm |
| Length | 2.92mm |
| Width | 1.3mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV809K33DBZT Overview
Power management is mounted through 3 terminals. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 3.3V. During operation, the power ic is supplied with a voltage of 1. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 3 pins on IC management. There are 3 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. Supplied with a operating current of 9μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to 809K33, which is the base power ics number. Voltage supervisor can work with a supply temperature of 25μA at the most.
TLV809K33DBZT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TLV809K33DBZT Applications
There are a lot of Texas Instruments TLV809K33DBZT Voltage Supervisors applications.
- Automotive permanent magnet synchronous motors
- Medical-specific insulation monitor
- Urban rail transit weak current power monitoring
- Data storage applications
- Battery cars
- emergency room
- Magnetic resonance imaging
- Multi-voltage system
- Power distribution systems of CCU
- Detection of phase sequence
