banner_page

TLV810MDBZT

3.3V3 Terminals 3-Pin TLV810 Voltage supervisor1 Channels Min 1.1V Max 6V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLV810MDBZT
  • Package: TO-236-3, SC-59, SOT-23-3
  • Datasheet: -
  • Stock: 562
  • Description: 3.3V3 Terminals 3-Pin TLV810 Voltage supervisor1 Channels Min 1.1V Max 6V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case TO-236-3, SC-59, SOT-23-3
Surface Mount YES
Number of Pins 3
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.96mm
Base Part Number TLV810
Output Push-Pull, Totem Pole
Pin Count 3
Number of Channels 1
Max Supply Voltage 6V
Min Supply Voltage 1.1V
Operating Supply Current 20μA
Max Supply Current 30μA
Adjustable Threshold NO
Quiescent Current 9μA
Watchdog Timer No
Reset Active High
Voltage - Threshold 4.38V
Number of Voltages Monitored 1
Reset Timeout 120ms Minimum
Min Reset Threshold Voltage 4.28V
Max Reset Threshold Voltage 4.48V
Threshold Voltage +4.38V
Height 1.22mm
Length 2.92mm
Width 1.3mm
Thickness 1mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLV810MDBZT Overview


Power management is mounted through 3 terminals. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.3V. When 1 is applied to the power ic, it conducts. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 3 pins in it. This power management has 3 pins. IC management can only work with a supply voltage of 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. Supplied with a operating current of 20μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using TLV810, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 30μA.

TLV810MDBZT Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current

TLV810MDBZT Applications


There are a lot of Texas Instruments TLV810MDBZT Voltage Supervisors applications.

  • FPGA design
  • Precision measurement
  • Power distribution systems of infant care room
  • Electrical fire monitoring system
  • Multi-voltage system
  • Urban rail transit weak current power monitoring
  • Analog circuit
  • Unattended substation automation
  • Automotive power systems
  • Satellite navigation

Write a review

Note: HTML is not translated!
    Bad           Good