Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Surface Mount |
YES |
Number of Pins |
3 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.96mm |
Base Part Number |
TLV810 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
1.1V |
Operating Supply Current |
20μA |
Max Supply Current |
30μA |
Adjustable Threshold |
NO |
Quiescent Current |
9μA |
Watchdog Timer |
No |
Reset |
Active High |
Voltage - Threshold |
2.64V |
Number of Voltages Monitored |
1 |
Reset Timeout |
120ms Minimum |
Min Reset Threshold Voltage |
2.58V |
Max Reset Threshold Voltage |
2.7V |
Threshold Voltage |
+2.64V |
Height |
1.22mm |
Length |
2.92mm |
Width |
1.3mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV810RDBZR Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. Packaged in the form of a Tape & Reel (TR), power management is easy to use. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts in a 3.3V-voltage supply. During operation, the power ic is supplied with a voltage of 1. This power ic can be sub-categorized as Power Management Circuits. There are a total of 3 pins on power management. Pin count of the power management is 3. Supply voltage (Vsup) should be at least 1.1V for this power management. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 20μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using TLV810, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 30μA.
TLV810RDBZR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current
TLV810RDBZR Applications
There are a lot of Texas Instruments TLV810RDBZR Voltage Supervisors applications.
- Smartphones
- Detection of phase imbalance
- Efficient information transmission
- Analog circuit
- Radar
- Insulation fault location system
- Dash board
- Sensitive sensors
- Important electronics for automotive safety
- Power communication system