TLV810RDBZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Surface Mount | YES |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.96mm |
| Base Part Number | TLV810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 20μA |
| Max Supply Current | 30μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.64V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.58V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.64V |
| Height | 1.22mm |
| Length | 2.92mm |
| Width | 1.3mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV810RDBZT Overview
It is mounted through 3 terminals on the power management. Tape & Reel (TR)-packaging is used. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. During operation, the power ic is supplied with a voltage of 3.3V. IC management is possible to find a succession of 1 voltages that have been checked. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 3. 3 pins are on the supervisor. IC management can only work with a supply voltage of 1.1V volts. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 20μA. It is always advisable to use TLV810, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 30μA.
TLV810RDBZT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
20μA operating supply current
TLV810RDBZT Applications
There are a lot of Texas Instruments TLV810RDBZT Voltage Supervisors applications.
- Network equipment
- Set top box
- Utility meter
- Electronics installed in the vehicle
- Important electronics for automotive protection
- Battery cars
- Embedded computing
- Smart meter
- Household appliances
- Solar power charger
