TLV9061IDPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-XFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.48mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLV9061 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Nominal Supply Current | 538μA |
| Slew Rate | 6.5V/μs |
| Amplifier Type | CMOS |
| Common Mode Rejection Ratio | 103 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 300μV |
| Current - Output / Channel | 50mA |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Common-mode Reject Ratio-Min | 80 dB |
| Height | 0m |
| Length | 800μm |
| Width | 800μm |
| Thickness | 370μm |
| RoHS Status | ROHS3 Compliant |
TLV9061IDPWR Overview
In order to protect the op amps, a 5-XFDFN Exposed Pad case is used. Op amps are CMOS types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 5. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 5 pins are available on the instrumentation amplifier. Op amp ic rates 300μV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C TA. On this buffer amplifier, there are 1 circuits. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals.
TLV9061IDPWR Features
supply voltage of 5V
Output Type: Rail-to-Rail
TLV9061IDPWR Applications
There are a lot of Texas Instruments TLV9061IDPWR Instrumentational OP Amps applications.
- Proportional operation circuits
- Video amplifiers
- ECG equipment
- Division circuits
- Signal operation
- Comparator
- Semiconductor detectors
- Television
- Band-stop filter
- Proportional counter tubes
