TMC246A-PA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LQFP |
| Number of Pins | 44 |
| Supplier Device Package | 44-PQFP (10x10) |
| Operating Temperature | -40°C~140°C TJ |
| Packaging | Tray |
| Published | 2009 |
| Series | stallGuard™ |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | SMD/SMT |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Applications | General Purpose |
| Technology | HVCMOS |
| Voltage - Supply | 3V~5.5V |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 8 |
| Output Voltage | 5.5V |
| Max Output Current | 1.5A |
| Number of Channels | 1 |
| Interface | SPI |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.5A |
| Max Output Voltage | 5.5V |
| Logic Function | AND |
| Voltage - Load | 7V~34V |
| Switching Frequency | 50kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TMC246A-PA Overview
This package is designed to work with [0].A 44-LQFPcase is included with the part.The part should be mounted by Surface Mount.I believe it would be suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 3V~5.5V volts.In terms of operating temperature, it falls within the range -40°C~140°C TJ.You can apply voltage at 7V~34Vto the load.There is a recommended mounting method of Surface Mount.Maintain the current output of the part at 1.5A volts.In this device, there are 44 pins.Drivers controllers is possible to access 8outputs.In this case, 5.5Vis maintained as the output voltage.Drivers controllers is maintained at a voltage of stallGuard?.Drivers controllers is possible to recognize Stepperas the type of motor.150°Cis the maximum operating temperature.The operating temperature should be higher than -40°C.The maximum output current reaches 1.5Ato meet the operating requirements.There are 1 channels on it.With its maximum supply voltage of [0], it is capable of applying the device.A minimum supply voltage of 3Vcan be used for the operation of this device.
TMC246A-PA Features
Applications : General Purpose
Load voltage across the chip 7V~34V
designed with 8 outputs
Motor Type classified as Stepper
TMC246A-PA Applications
There are a lot of Trinamic Motion Control GmbH TMC246A-PA motor drivers applications.
- Arena lighting
- Side marker lights
- Lighting for the ambience of tunability
- Street lights
- Dash
- Turn signals
- Mobile phone display backlight and key light driving
- AM radio
- LCD displays
- Outdoor area lights
