TMC262-LA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tray |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 3V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Controller - Commutation, Direction Management |
| Number of Outputs | 8 |
| Output Voltage | 10V |
| Supply Voltage-Max (Vsup) | 59V |
| Supply Voltage-Min (Vsup) | 9V |
| Interface | SPI, Step/Direction |
| Nominal Supply Current | 12mA |
| Output Configuration | Pre-Driver - Half Bridge (4) |
| Output Current | 15mA |
| Voltage - Load | 9V~59V |
| Max Junction Temperature (Tj) | 150°C |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/256 |
| Height | 900μm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TMC262-LA Overview
The package is designed with [0].Drivers controllers comes in a 32-VFQFN Exposed Pad case.In most cases, it is recommended to mount the part at Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.There is a possibility of providing 3V~5.25Vvolts through the device.Regarding the operating temperature, it is in the range of -40°C~125°C TJ°C.A total of 32terminations are available in this part.The voltage can applied to the load at the rate of 9V~59V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 24V.Ideally, it should be mounted in the Surface Mountposition.32pins are used in its design.8outputs are available in total.In this case, the output voltage is kept at 10V volts.The motor type can be recognized as Stepper.As it has an output current of [0], it provides maximum flexibility in design.
TMC262-LA Features
Applications : General Purpose
Load voltage across the chip 9V~59V
designed with 8 outputs
Motor Type classified as Stepper
TMC262-LA Applications
There are a lot of Trinamic Motion Control GmbH TMC262-LA motor drivers applications.
- A cross between entertainment
- General lighting
- RGB and monochromatic LED drivers for signage and traffic signals
- Multiple output capability
- Brake lights
- Monitoring the energy that the luminaire uses
- Handheld devices
- AM radio
- Human-centric lighting
- Camera-enabled smartphones
