TMS320C203PZ
| Parameters | |
|---|---|
| Number of Terminations | 100 |
| ECCN Code | 3A001.A.3 |
| Type | Fixed Point |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 80MHz |
| Base Part Number | TMS320C203 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Interface | SSP, UART |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 1.1kB |
| Number of Bits | 16 |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 544 |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 1 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM | 1kB |
| Clock Rate | 40MHz |
| Height | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 635.596308mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | TMS320C20x |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
TMS320C203PZ Overview
In the 100-LQFP package, it is a type of electronic component.Tray packaging is provided for it.In addition to meeting a wide range of requirements, it is a member of Fixed Point.It is mounted in the direction of Surface Mount as shown in the image below.If it is operating at the temperature of 0°C~70°C TA, then it will be operating normally.The analog voltage range of 5.00V refers to the input or output voltage.It is a part of the TMS320C20x series of digital signal processors.The uses of this product can be terminated with 100.The voltage supplied by 5V is used to operate it.100 component pins are present.There are 100 pins in its configuration.The base part number TMS320C203 can be used to identify many associated parts.Specifically, the device is designed to operate at a frequency of 80MHz.The mounting method is Surface Mount.It is possible to supply as low a voltage as 4.5V to this device.There is a maximum voltage supply of 5.5V to this device.A voltage of 5V is used as the supply voltage.In industrial environments, 1 timers provide accurate feedback and event activation.A source external to the system causes 4 interrupts.In the device are 16 pieces of information.Using serial 1 I/Os, devices can communicate.
TMS320C203PZ Features
Supplied in the 100-LQFP package
Operating supply voltage of 5V
4 external interrupts
TMS320C203PZ Applications
There are a lot of Texas Instruments TMS320C203PZ DSP applications.
- Monitoring equipment
- Consumer electronic gadgets
- Smart phones
- Audio compression
- Compression of videos
- Speech signal processing
- Vehicle electronics
- Seismology
- Signal processing for telecommunications
- Image compression
