TMS320C25FNL
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Weight | 4.869796g |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 68 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | PID CONTROL; 256 WORDS DATA/PROG RAM |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40.96MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Memory Size | 8kB |
| Operating Supply Current | 100mA |
| Nominal Supply Current | 100mA |
| RAM Size | 1.1kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Number of Bits | 16 |
| Bit Size | 16 |
| Frequency (Max) | 40MHz |
| Data Bus Width | 16b |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 544 |
| Number of Serial I/Os | 1 |
| Number of Timers | 1 |
| ROM Programmability | MROM |
| Number of External Interrupts | 3 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Capacitance - Input | 15pF |
| Height | 4.57mm |
| Length | 24.23mm |
| Width | 24.23mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TMS320C25FNL Overview
It is a kind of electronic component that comes in a package of PLCC.The terminations for its uses are 68.It operates with the supply voltage of 5V.Pins are located on the 68 component.This configuration contains 68 pins.This device is designed specifically to operate at frequency 40.96MHz.Surface Mount is the method of mounting it.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.This device operates at a voltage as low as 4.75V.There is a maximum voltage supply of 5.25V to this device.The device operates on a voltage of 5V as its supply voltage.Its memory can store 8kB data.The electric power supply is 5V.Electronic parts can also add more features to PID CONTROL; 256 WORDS DATA/PROG RAM.For its uPs/uCs/peripheral ICs, DIGITAL SIGNAL PROCESSOR, OTHER is used.There should be a difference between 70°C and the operating temperature.A temperature exceeding 0°C is recommended for operation.There are 1 timers programmed to provide accurate feedback and event activation in industrial environments.A source external to the system causes 3 interrupts.In the device are 16 pieces of information.Keep its frequency below 40MHz at all times.A 1 serial I/O communicates data between two devices.
TMS320C25FNL Features
Supplied in the PLCC package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
3 external interrupts
TMS320C25FNL Applications
There are a lot of Texas Instruments TMS320C25FNL DSP applications.
- Electronic information engineering
- Remote sensing image processing technology
- Image compression
- Automatic analysis system of EEG or ECG
- Radio detection and rangin systems
- Audio
- Medical imaging
- Speech processing and recognition
- Smart phones
- Other sensor array processing
