TMS320C25FNL50
| Parameters | |
|---|---|
| Number of Timers | 1 |
| ROM Programmability | MROM |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Non-Volatile Memory | ROM (8kB) |
| On Chip Data RAM | 1kB |
| Height Seated (Max) | 4.57mm |
| Length | 24.2316mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 181 |
| Weight | 4.869796g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | TMS320C2x |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| ECCN Code | 3A991.A.2 |
| Type | Fixed Point |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Base Part Number | TMS320C25 |
| Pin Count | 68 |
| JESD-30 Code | S-PQCC-J68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Memory Size | 8kB |
| RAM Size | 1.1kB |
| Supply Current-Max | 185mA |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Address Bus Width | 16 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 544 |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 1 |
TMS320C25FNL50 Overview
Basically, it is a type of electronic component that is available in a 68-LCC (J-Lead) package.There is a packaging method of Tube provided with it.As a member of Fixed Point, it is ideally suitable for a wide range of applications.Surface Mount is the direction in which it is mounted.If it is operating at the temperature of 0°C~70°C TA, then it will be operating normally.It refers to the analog voltage range of 5.00V that may be input or output.The TMS320C2x series includes this digital signal processor.In order to use it, it has 68 terminations.This device is powered by 5V's supply voltage.In this component, there are pins for 68.In its configuration, it contains 181 pins.By using its base part number of TMS320C25, many related parts can be identified.The device is specifically designed to operate at the frequency of 50MHz.Mounting is accomplished using Surface Mount.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.This device operates at a voltage as low as 4.75V.A maximum voltage of 5.25V can be provided to this device.5V is the supply voltage for this device.Using this device, you can store 8kB data.The electric power supply is 5V.It is possible to program 1 timers in industrial environments to provide accurate feedback and trigger events.3 interrupts are caused by external sources.Serial 1 I/Os are used to communicate data between devices.
TMS320C25FNL50 Features
Supplied in the 68-LCC (J-Lead) package
Operating supply voltage of 5V
3 external interrupts
TMS320C25FNL50 Applications
There are a lot of Texas Instruments TMS320C25FNL50 DSP applications.
- Statistical signal processing
- Smart phones
- Tomography technology
- Sonar
- Smart camera
- Consumer electronic gadgets
- Audio compression
- Geoscience signal processing
- Scene analysis technology
- Biomedical treatment
