TMS320C25FNLR50
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 68 |
| Weight | 4.869796g |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | TMS320C2x |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| ECCN Code | 3A991.A.2 |
| Type | Fixed Point |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TMS320C25 |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Memory Size | 8kB |
| RAM Size | 1.1kB |
| Supply Current-Max | 185mA |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Address Bus Width | 16 |
| Core Architecture | TMS320 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| RAM (words) | 544 |
| Voltage - I/O | 5.00V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (8kB) |
| On Chip Data RAM | 1kB |
| Height Seated (Max) | 4.5mm |
| Length | 24.23mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TMS320C25FNLR50 Overview
In electronic terms, it is a type of component that comes in the package of type 68-LCC (J-Lead) .Packaging method Tape & Reel (TR) is provided.Due to its membership in Fixed Point, it is ideally suited for a wide range of uses.The machine is mounted in the way of Surface Mount in order to facilitate its operation.The operation of the device at the temperature of 0°C~70°C TA ensures the normal operation of the device.The analog voltage range of 5.00V refers to the voltage that can be input or ouput.As part of the TMS320C2x series, this digital signal processor is included.Its uses have 68 terminations.The supply voltage is 5V.68 component pins are present.The configuration of the device includes 68 pins.The base part number TMS320C25 allows identification of a wide range of related parts.50MHz is a frequency at which the device operates according to a specific design.A Surface Mount mounting method is used for its mounting.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.In this device, the minimum voltage is 4.75V.It can be supplied with a maximum voltage of 5.25V.A supply voltage of 5V is required for its operation.It can store 8kB data in its memory.5V electric power supplies the facility.TMS320 architecture is used for this processor core.
TMS320C25FNLR50 Features
Supplied in the 68-LCC (J-Lead) package
Operating supply voltage of 5V
TMS320C25FNLR50 Applications
There are a lot of Texas Instruments TMS320C25FNLR50 DSP applications.
- Fourier transform
- Audio
- Smart camera
- Digital image processing, data compression
- Medical imaging
- Sonar
- Streaming videos
- Processing system
- Biomedical engineering
- Geoscience signal processing
