TMS320C31PQL60
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 132 |
| ECCN Code | 3A001.A.3 |
| Type | Floating Point |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 60MHz |
| Base Part Number | 320C31 |
| Pin Count | 132 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| RAM Size | 8kB |
| Supply Current-Max | 475mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Address Bus Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 2000 |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 1 |
| Number of Timers | 2 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 32 |
| Non-Volatile Memory | External |
| On Chip Data RAM | 8.25kB |
| Number of DMA Channels | 1 |
| Height Seated (Max) | 4.57mm |
| Length | 24.13mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-BQFP Bumpered |
| Number of Pins | 132 |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tube |
| Series | TMS320C3x |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
TMS320C31PQL60 Overview
In electronic terms, it is a type of component that comes in the package of type 132-BQFP Bumpered .Packaging way Tube is provided.Due to its membership in Floating Point, it is ideally suited for a wide range of uses.The device is attached in a way that faces Surface Mount.As long as it is operated at the temperature of 0°C~85°C TC, it will operate normally.5.00V refers to the range of analog voltages that can be input or output.The TMS320C3x series incorporates this digital signal processor.In order to use it, it has 132 terminations.The supply voltage is 5V.Pins are available on the 132 component.An overview of its configuration can be found in the section on 132 pins.Based on its base part number of 320C31, many ralated parts can be found.The device operates at the frequency of 60MHz in accordance with a specific design.Surface Mount is used as the mounting method.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.It is possible to supply as low a voltage as 4.75V to this device.The maximum voltage for this device is 5.25V.5V is the supply voltage for this device.5V electric power supplies the facility.It is possible to program 2 timers in industrial environments to provide accurate feedback and trigger events.Interrupts caused by an external source cause 4 interrupts.1 DMA channels transfer data without overloading the CPU.For data communication between devices, 1 serial I/Os are used.
TMS320C31PQL60 Features
Supplied in the 132-BQFP Bumpered package
Operating supply voltage of 5V
4 external interrupts
TMS320C31PQL60 Applications
There are a lot of Texas Instruments TMS320C31PQL60 DSP applications.
- Biomedical treatment
- Geophysical processing
- Sonar
- Machinery and equipment
- Audio signal
- Digital hardware
- Digital camera
- 3D tomography and imaging processing
- Computers and laptop
- Audio compression
