TMS320C32PCMA50
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-BQFP |
| Number of Pins | 144 |
| Weight | 5.482996g |
| Operating Temperature | -40°C~125°C TC |
| Packaging | Tray |
| Series | TMS320C3x |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 144 |
| ECCN Code | 3A991.A.2 |
| Type | Floating Point |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 50MHz |
| Base Part Number | 320C32 |
| Pin Count | 144 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| RAM Size | 2kB |
| Number of Bits | 32 |
| Supply Current-Max | 425mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 512 |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 1 |
| Number of Timers | 2 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| On Chip Data RAM | 2.25kB |
| Number of DMA Channels | 2 |
| Height | 3.4mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TMS320C32PCMA50 Overview
It is a type of electronic component available in package 144-BQFP.Packaging is provided in the form of Tray.Floating Point members are well suited for a wide range of applications.Surface Mount is mounted in a manner that allows it to be moved.If it is operating at the temperature of -40°C~125°C TC, then it will be operating normally.5.00V refers to the range of analog voltages that can be input or output.This digital signal processor is included into the TMS320C3x series.There are 144 terminations for its uses.The supply voltage is 5V.In this component, there are pins for 144.An overview of its configuration can be found in the section on 144 pins.There are a number of related parts that can be identified using the base part number 320C32.This device is designed specifically to operate at frequency 50MHz.Using Surface Mount as a mounting method, it is mounted.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.It is possible to supply as low a voltage as 4.75V to this device.There is a maximum voltage supply of 5.25V to this device.This device is powered by 5V's supply voltage.It receives electricity from 5V.A 2 timer can give accurate feedback and activate events in industrial settings.A source external to the system causes 4 interrupts.Upon opening the device, there are 32 pieces of information stored.It uses 2 DMA channels to transfer data without overloading the CPU.Using 1 serial interfaces, data can be communicated between devices.
TMS320C32PCMA50 Features
Supplied in the 144-BQFP package
Operating supply voltage of 5V
4 external interrupts
TMS320C32PCMA50 Applications
There are a lot of Texas Instruments TMS320C32PCMA50 DSP applications.
- Real-time effects
- Scene analysis technology
- Digital image processing
- Remote sensing image processing technology
- Computers and laptop
- Tomography technology
- Spectral density estimation
- Tomography technology
- MP3 audio player
- Automobiles
