TMS320C5535AZHH10
| Parameters | |
|---|---|
| Memory Size | 128kB |
| Number of I/O | 20 |
| RAM Size | 320kB |
| Memory Type | EEPROM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Number of Bits | 16 |
| Bit Size | 16 |
| Frequency (Max) | 100MHz |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of ADC Channels | 6 |
| ROM Programmability | MROM |
| Number of External Interrupts | 2 |
| Number of I2C Channels | 1 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Height | 1.4mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Weight | 325.906118mg |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -10°C |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 144 |
| Operating Supply Voltage | 1.3V |
| Temperature Grade | COMMERCIAL |
| Interface | I2C, MMC, SD, SPI, UART, USB |
| Max Supply Voltage | 1.43V |
| Min Supply Voltage | 1.24V |
TMS320C5535AZHH10 Overview
In electronic terms, it is a type of component that comes in the package of type BGA .The uses of this product can be terminated with 144.It is supplied with voltage by 1.3V.Pins are available for 144 components.In its configuration, it contains 144 pins.This device is designed specifically to operate at frequency 100MHz.It adopts Surface Mount as its mounting way.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.In this device, the minimum voltage is 1.24V.This device can handle a maximum voltage of 1.43V.This device is powered by 1.3V's supply voltage.There is a memory on this device that can store 128kB data.DIGITAL SIGNAL PROCESSOR, OTHER is used as uPs/uCs/peripheral ICs.Time and external events are measured and counted with 3 timers/counters.20 I/Os are present on the device.As far as memory type is concerned, it uses EEPROM.A lower operating temperature than 70°C is recommended.There should be a temperature difference over -10°C during operation.The external source of 2 interrupts is causing 2 interrupts.In the device, 16 information is stored.Its frequency should not exceed 100MHz.A number of ICs communicate using 1 I2C channels.In an ADC, 6 channels refer to the number of analog values that can be read simultaneously.
TMS320C5535AZHH10 Features
Supplied in the BGA package
Operating supply voltage of 1.3V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
3 timers/counters
20 I/Os
2 external interrupts
TMS320C5535AZHH10 Applications
There are a lot of Texas Instruments TMS320C5535AZHH10 DSP applications.
- Vehicle electronics
- Infinite impulse response filters
- Infrared
- Streaming music
- Financial signals
- Compression of videos
- Biomedical treatment
- Encoding/broadcast
- Medical imaging
- Geophysical processing
