TMS320DM6431ZWT3
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Weight | 789.392471mg |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM643x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 120MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 320DM6431 |
| Pin Count | 361 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, McASP, McBSP, UART, 10/100 Ethernet MAC |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 1.14V |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Core Architecture | TMS320 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 1 |
| Number of Timers | 5 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 128kB |
| Clock Rate | 300MHz |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320DM6431ZWT3 Overview
This is an electronic component with a 361-LFBGA package.There is a packaging method of Tray provided with it.In addition to meeting a wide range of requirements, it is a member of Fixed Point.It is mounted in the way of Surface Mount.By operating the device at the temperature of 0°C~90°C TJ, a normal operation is ensured.As the name implies, the analog voltage range of 1.8V 3.3V refers to the voltage that can be inserted or removed.TMS320DM643x, DaVinci? series digital signal processors contain this digital signal processor.The 361 terminations are used for its uses.This device is powered by 1.8V's supply voltage.Pins are located on the 361 component.361 pins can be found in its configuration.The base part number 320DM6431 can be used to identify many associated parts.This device is designed specifically to operate at frequency 120MHz.Surface Mount is used as the mounting method.According to its specific characteristics, this device is classified in the subcategory Digital Signal Processors.Devices like this can be powered with as little as 1.14V volts.The maximum voltage supplied to this device amounts to 3.63V.3.3V is the supply voltage for this device.Data format and transmission speed are configurable on 1 UART channels for asynchronous serial communication.By using this electronic part, ALSO REQUIRES 3.3V SUPPLY can be enhanced with additional features.It is based on the TMS320 architecture.In industrial environments, 5 timers provide accurate feedback and event activation.
TMS320DM6431ZWT3 Features
Supplied in the 361-LFBGA package
Operating supply voltage of 3.3V
TMS320DM6431ZWT3 Applications
There are a lot of Texas Instruments TMS320DM6431ZWT3 DSP applications.
- Receivers
- Smart camera
- Speech processing
- Boats
- Electronic information engineering
- Geophysical processing
- Voice recognition
- Image compression
- Biomedical engineering
- Dam design
