TMS320DM6431ZWTQ3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 14 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Weight | 789.392471mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | TMS320DM643x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 300MHz |
| Base Part Number | 320DM6431 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.2V |
| Interface | I2C, McASP, McBSP, UART, 10/100 Ethernet MAC |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 1.14V |
| Number of I/O | 111 |
| Memory Type | DDR2, FLASH, NAND, SDRAM, SRAM |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 8b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| RAM (words) | 65536 |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 1 |
| Number of Timers | 5 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 128kB |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320DM6431ZWTQ3 Overview
It is a kind of electronic component available in the 361-LFBGA package.The packaging way is Tube.Due to its membership in Fixed Point, it is ideally suited for a wide range of uses.The device is attached in a way that faces Surface Mount.Keeping the device at the temperature of -40°C~125°C TJ will ensure that it runs as it should.The digital voltage range of 1.8V 3.3V refers to the voltage that can be input or output.The TMS320DM643x, DaVinci? series incorporates this digital signal processor.There are 361 terminations for its uses.A voltage of 1.8V is used as the supply voltage.361 component pins are present.The configuration of this board includes 361 pins.With its base part number of 320DM6431, many related parts can be identified.300MHz is a frequency at which the device operates according to a specific design.Surface Mount is used as the mounting method.As a result of its specific characteristics, this device can be classified under the Digital Signal Processors subcategory.1.14V is the minimum voltage that can be supplied to this device.This device can handle a maximum voltage of 3.63V.The device operates on a voltage of 1.2V as its supply voltage.There is a possibility to configure data formats and transmission speeds for 1 UART channels configured for asynchronous serial communication.With this electronic part, additional features of ALSO REQUIRES 3.3V SUPPLY can also be provided.111 I/Os are present on the device.The memory type adopted by it is DDR2, FLASH, NAND, SDRAM, SRAM.In industrial environments, 5 timers are programmed to provide accurate feedback.On the device, there is 32 information.
TMS320DM6431ZWTQ3 Features
Supplied in the 361-LFBGA package
Operating supply voltage of 1.2V
111 I/Os
TMS320DM6431ZWTQ3 Applications
There are a lot of Texas Instruments TMS320DM6431ZWTQ3 DSP applications.
- MP3 audio player
- Digital hardware
- Smart phones
- Signal processing for telecommunications
- Computers and laptop
- TVs
- Vibration signal processing
- Seismology
- Automatic analysis system of EEG or ECG
- Encoding/broadcast
