TMS320DM6433ZWTQ5
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 361 |
| Weight | 789.392471mg |
| JESD-609 Code | e1 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Pin Count | 361 |
| Operating Supply Voltage | 1.2V |
| Temperature Grade | AUTOMOTIVE |
| Interface | Ethernet, I2C, McASP, PCI, UART |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 1V |
| Memory Type | DDR2, FLASH, NAND, SDRAM, SRAM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Bit Size | 32 |
| Frequency (Max) | 500MHz |
| Data Bus Width | 8b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 111 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| RAM (words) | 20480 |
| Number of UART Channels | 1 |
| Number of Timers | 5 |
| ROM Programmability | MROM |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TMS320DM6433ZWTQ5 Overview
In the BGA package, it is a type of electronic component.361 terminations are available for its use.It operates with the supply voltage of 1.2V.The 361 component has pins.The configuration of this board includes 361 pins.To operate at 500MHz frequency, the device has a specific design.It adopts Surface Mount as its mounting way.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.In order to power this device, a voltage as low as 1V needs to be supplied.This device can be powered by 3.63V voltages.In order for it to operate, 1.2V is the supply voltage.Data formats and transmission speeds are configurable for 1 UART channels used for asynchronous serial communication.This electronic part can also provide additional features to ALSO REQUIRES 3.3V SUPPLY.This system uses DIGITAL SIGNAL PROCESSOR, OTHER as its uPs, uCs, and peripheral ICs.As far as memory type is concerned, it uses DDR2, FLASH, NAND, SDRAM, SRAM.It is recommended to keep the operating temperature below 125°C.-40°C should be exceeded as the operating temperature.In industrial environments, 5 timers are programmed to provide accurate feedback.Its frequency should remain below 500MHz.Data transmission is handled by 111 programmable I/Os.
TMS320DM6433ZWTQ5 Features
Supplied in the BGA package
Operating supply voltage of 1.2V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
TMS320DM6433ZWTQ5 Applications
There are a lot of Texas Instruments TMS320DM6433ZWTQ5 DSP applications.
- Geophysical processing
- Image compression
- Biomedical engineering
- Medical imaging
- Infinite impulse response filters
- Remote sensing image processing technology
- Radio detection and rangin systems
- Tomography technology
- Electronic information engineering
- Speech processing
