TMS320DM6437ZDU5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 376-BBGA Exposed Pad |
| Number of Pins | 376 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | TMS320DM643x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 376 |
| ECCN Code | 3A991.A.2 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | unknown |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 320DM6437 |
| Pin Count | 376 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | HPI, I2C, McASP, McBSP, PCI, UART, 10/100 Ethernet MAC |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 1V |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Format | FLOATING POINT |
| RAM (words) | 81920 |
| Voltage - I/O | 1.8V 3.3V |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.05V 1.20V |
| On Chip Data RAM | 240kB |
| Clock Rate | 500MHz |
| Height Seated (Max) | 2.48mm |
| Length | 23mm |
| RoHS Status | ROHS3 Compliant |
TMS320DM6437ZDU5 Overview
It is a type of electronic component available in package 376-BBGA Exposed Pad.Packaging way Tray is provided.Due to its membership in Fixed Point, it is ideally suited for a wide range of uses.The mounting is carried out in the direction of Surface Mount.If it is operating at the temperature of 0°C~90°C TJ, then it will be operating normally.Voltages can be input or output within 1.8V 3.3V's analog voltage range.The TMS320DM643x, DaVinci? series includes this digital signal processor.In order to use it, it has 376 terminations.The voltage supplied by 1.8V is used to operate it.Pins are present on the 376 component.In its configuration, it contains 376 pins.It is possible to identify numerous related parts using the base part number 320DM6437.The device operates at the frequency of 600MHz in accordance with a specific design.As a mounting method, it uses Surface Mount.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.This device can be powered by voltages as low as 1V.The maximum voltage for this device is 3.63V.It operates with the supply voltage of 3.3V.
TMS320DM6437ZDU5 Features
Supplied in the 376-BBGA Exposed Pad package
Operating supply voltage of 3.3V
TMS320DM6437ZDU5 Applications
There are a lot of Texas Instruments TMS320DM6437ZDU5 DSP applications.
- Compression of videos
- Tomography technology
- Seismology
- Streaming videos
- Control systems
- Automobiles
- Digital image processing, data compression
- Smart camera
- Other sensor array processing
- Monitoring equipment
