TMS320DM6437ZWTQ5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Weight | 789.392471mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tray |
| Series | TMS320DM643x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Base Part Number | 320DM6437 |
| Pin Count | 361 |
| Operating Supply Voltage | 1.2V |
| Interface | HPI, I2C, McASP, McBSP, PCI, UART, 10/100 Ethernet MAC |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 1V |
| Number of I/O | 111 |
| Memory Type | DDR2, FLASH, NAND, SDRAM, SRAM |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 8b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 2 |
| Number of Timers | 5 |
| ROM Programmability | MROM |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.05V 1.20V |
| On Chip Data RAM | 240kB |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320DM6437ZWTQ5 Overview
In electronic terms, it is a type of component that comes in the package of type 361-LFBGA .It has a packaging style of Tray.Due to its membership in Fixed Point, it is ideally suited for a wide range of uses.The mounting is carried out in the direction of Surface Mount.It is recommended that the device operate at a temperature of -40°C~125°C TJ to ensure its normal operation.As the name implies, the analog voltage range of 1.8V 3.3V refers to the voltage that can be inserted or removed.It is a part of the TMS320DM643x, DaVinci? series of digital signal processors.Its uses have 361 terminations.The voltage supplied by 1.8V is used to operate it.Pins are located on the 361 component.In its configuration, it contains 361 pins.Several related parts can be identified using its base part number, 320DM6437.Specifically, the device is designed to operate at a frequency of 500MHz.As a mounting method, it uses Surface Mount.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.This device requires a minimum voltage of 1V.3.63V is the maximum voltage that can be supplied to this device.1.2V is the supply voltage for this device.There is a possibility to configure data formats and transmission speeds for 2 UART channels configured for asynchronous serial communication.A further set of features can be provided by this electronic part for ALSO REQUIRES 3.3V SUPPLY as well.There are 111 I/Os on the device.DDR2, FLASH, NAND, SDRAM, SRAM is its memory type.There are 5 timers programmed to provide accurate feedback and event activation in industrial environments.32 information is stored on the device.
TMS320DM6437ZWTQ5 Features
Supplied in the 361-LFBGA package
Operating supply voltage of 1.2V
111 I/Os
TMS320DM6437ZWTQ5 Applications
There are a lot of Texas Instruments TMS320DM6437ZWTQ5 DSP applications.
- Computer vision technology
- TVs
- Smart camera
- Statistical signal processing
- Finite impulse response digital filters
- Speech processing
- Signal processing for telecommunications
- Airplanes
- 3D tomography and imaging processing
- Geoscience signal processing
