TMS320DM8148SCYE1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 684-BFBGA, FCBGA |
| Number of Pins | 684 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | DM81x Video SOC, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 684 |
| Type | Digital Media System-on-Chip (DMSoC) |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 1.35V |
| Terminal Pitch | 0.8mm |
| Frequency | 700MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 320DM8148 |
| Pin Count | 684 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Power Supplies | 1.1/1.35V |
| Interface | CAN, Ethernet, I2C, McASP, McBSP, MMC/SD/SDIO, SATA, SPI, UART, USB |
| Number of I/O | 128 |
| Speed | 1000 MHz |
| RAM Size | 64kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.5V 1.8V 3.3V |
| Number of UART Channels | 6 |
| Number of Cores | 2 |
| Non-Volatile Memory | ROM (48kB) |
| Voltage - Core | 1.1V 1.2V 1.35V |
| On Chip Data RAM | 1.08MB |
| Clock Rate | 700MHz DSP, 1GHz ARM® |
| Height | 3.06mm |
| Length | 23mm |
| Width | 23mm |
| Thickness | 2.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320DM8148SCYE1 Overview
An electronic component available in package 684-BFBGA, FCBGA.A packaging way of Tray is provided.Due to its membership in Digital Media System-on-Chip (DMSoC), it is ideally suited for a wide range of uses.There is a mounting point for it along the direction of Surface Mount.Keeping the device at the temperature of 0°C~90°C TJ will ensure that it runs as it should.This refers to the analog voltage range that can be input or output from 1.5V 1.8V 3.3V.The DM81x Video SOC, DaVinci? series incorporates this digital signal processor.The uses of this product can be terminated with 684.The supply voltage is 1.35V.684 component pins are present.There are 684 pins in its configuration.The base part number 320DM8148 can be used to identify many associated parts.Specifically, the device is designed to operate at a frequency of 700MHz.The mounting method of the device is Surface Mount.According to its specific characteristics, this device is classified in the subcategory Digital Signal Processors.1.2V is the supply voltage for this device.1.1/1.35V electric power powers it.It is possible to configure the data format and transfer speed of 6 UART channels for synchronous serial communication.An architecture of ARM is adopted by this processor core.128 I/Os are present on the device.2 cores are included.
TMS320DM8148SCYE1 Features
Supplied in the 684-BFBGA, FCBGA package
Operating supply voltage of 1.2V
128 I/Os
2 cores
TMS320DM8148SCYE1 Applications
There are a lot of Texas Instruments TMS320DM8148SCYE1 DSP applications.
- TVs
- Compression of videos
- Radar
- Automobiles
- Geoscience signal processing
- Digital hardware
- Computers and laptop
- Biometrics
- MP3 audio player
- Streaming music
