TMS320LC203PZA
| Parameters | |
|---|---|
| RAM (words) | 544 |
| Voltage - I/O | 3.30V |
| Number of Serial I/Os | 1 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM | 1kB |
| Clock Rate | 40MHz |
| Height | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 635.596308mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | TMS320C20x |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Type | Fixed Point |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40.96MHz |
| Base Part Number | 320LC203 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Interface | SSP, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| RAM Size | 1.1kB |
| Number of Bits | 16 |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | NO |
TMS320LC203PZA Overview
It is a kind of electronic component that comes in a package of 100-LQFP.The packaging way is Tray.Fixed Point members are well suited for a wide range of applications.The mounting is carried out in the direction of Surface Mount.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.The digital voltage range of 3.30V refers to the voltage that can be input or output.TMS320C20x series digital signal processors contain this digital signal processor.In order to use it, it has 100 terminations.The supply voltage is 3.3V.Pins are available for 100 components.The configuration of the device includes 100 pins.There are a number of related parts that can be identified using the base part number 320LC203.40.96MHz is a frequency at which the device operates according to a specific design.A Surface Mount mounting method is used for its mounting.In this device, the minimum voltage is 3V.A maximum voltage of 3.6V can be provided to this device.Using 3.3V as the supply voltage, it operates.There are 1 timers programmed to provide accurate feedback and event activation in industrial environments.The external source of 4 interrupts is causing 4 interrupts.The device stores 16 pieces of information.1 serial I/Os are used for communicating data between devices.
TMS320LC203PZA Features
Supplied in the 100-LQFP package
Operating supply voltage of 3.3V
4 external interrupts
TMS320LC203PZA Applications
There are a lot of Texas Instruments TMS320LC203PZA DSP applications.
- Boats
- Speech processing
- Radio detection and rangin systems
- Radar
- Receivers
- Infrared
- Vibration signal processing
- Audio
- Automobile electronic gadgets
- Automatic analysis system of EEG or ECG
