TMS320LC206PZA80
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 635.596308mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | TMS320C20x |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 100 |
| ECCN Code | 3A001.A.3 |
| Type | Fixed Point |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 80MHz |
| Base Part Number | 320LC206 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Interface | SSP, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Memory Size | 64kB |
| RAM Size | 9.1kB |
| Number of Bits | 16 |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 4640 |
| Voltage - I/O | 3.30V |
| Number of Timers | 1 |
| ROM Programmability | MROM |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| On Chip Data RAM | 9kB |
| Number of DMA Channels | 1 |
| Height | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320LC206PZA80 Overview
The 100-LQFP package contains these electronic components.There is a packaging method of Tray provided with it.In addition to meeting a wide range of requirements, it is a member of Fixed Point.It is mounted in the way of Surface Mount.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.This refers to the analog voltage range that can be input or output from 3.30V.This digital signal processor is part of the TMS320C20x series.Its uses have 100 terminations.A voltage of 3.3V is used as the supply voltage.100 components have pins.In its configuration, 100 pins can be found.By using its base part number of 320LC206, many related parts can be identified.In order for the device to operate at 80MHz frequency, there is a specific design.Surface Mount is used as the mounting method.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.It is possible to supply as low a voltage as 2.7V to this device.The maximum voltage supplied to this device amounts to 3.6V.It operates with the supply voltage of 3.3V.Using this device, you can store 64kB data.It is possible to program 1 timers in industrial environments to provide accurate feedback and trigger events.External sources are causing 4 interrupts.16 information is stored on the device.Data is transferred using 1 DMA channels without overloading the CPU.
TMS320LC206PZA80 Features
Supplied in the 100-LQFP package
Operating supply voltage of 3.3V
4 external interrupts
TMS320LC206PZA80 Applications
There are a lot of Texas Instruments TMS320LC206PZA80 DSP applications.
- Infinite impulse response filters
- Infrared
- Automobile electronic gadgets
- Seismology
- Digital communications
- Automatic analysis system of EEG or ECG
- Control systems
- Airplanes
- TVs
- Image signal processing
