TMS320VC5510AGGW1
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Weight | 529.08715mg |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.6V |
| Frequency | 160MHz |
| Pin Count | 240 |
| Operating Supply Voltage | 1.6V |
| Power Supplies | 1.63.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.55V |
| Memory Size | 32kB |
| RAM Size | 320kB |
| Memory Type | EPROM, SDRAM, SRAM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Number of Bits | 32 |
| Bit Size | 16 |
| Frequency (Max) | 160MHz |
| Data Bus Width | 32b |
| Core Architecture | TMS320 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 8 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Number of Timers | 2 |
| ROM Programmability | MROM |
| Number of External Interrupts | 6 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Height | 1.4mm |
| Length | 15mm |
| Width | 15mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TMS320VC5510AGGW1 Overview
It is a kind of electronic component available in the BGA package.240 terminations are available for its use.1.6V is the supply voltage.Pins are present on the 240 component.This configuration contains 240 pins.A specific design is present for the device in order for it to operate at the frequency of 160MHz.Using Surface Mount as a mounting method, it is mounted.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.This device requires a minimum voltage of 1.55V.A maximum voltage of 3.6V can be provided to this device.The device operates with a supply voltage of 1.6V.This device is able to store 32kB data in its memory.There is an electric supply from 1.63.3V.The 0 UART channels support synchronous serial communication with configurable data formats and rates.With this electronic part, additional features of ALSO REQUIRES 3.3V SUPPLY can also be provided.For its uPs/uCs/peripheral ICs, DIGITAL SIGNAL PROCESSOR, OTHER is used.It is based on the TMS320 architecture.EPROM, SDRAM, SRAM is the type of memory it uses.It is recommended that the operating temperature be lower than 85°C.There should be a temperature difference over -40°C during operation.Industrial environments utili2e 2 timers for accurate feedback and event activation.A source external to the system causes 6 interrupts.On the device, there is 32 information.A frequency of less than 160MHz should be used.To transmit data, 8 programmable I/Os are used.
TMS320VC5510AGGW1 Features
Supplied in the BGA package
Operating supply voltage of 1.6V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
6 external interrupts
TMS320VC5510AGGW1 Applications
There are a lot of Texas Instruments TMS320VC5510AGGW1 DSP applications.
- Image signal processing
- Compression of videos
- Seismology
- Geoscience signal processing
- Biometrics
- Smart phones
- Processing system
- Instrument modeling
- Biomedical treatment
- Infrared
