TMS320VC5510AGPHA2
| Parameters | |
|---|---|
| Base Part Number | 320VC5510 |
| Pin Count | 205 |
| Operating Supply Voltage | 3.3V |
| Interface | Host Interface, McBSP |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.55V |
| Memory Size | 32kB |
| RAM Size | 320kB |
| Bit Size | 16 |
| Data Bus Width | 32b |
| Address Bus Width | 22 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| RAM (words) | 163840 |
| Voltage - I/O | 3.30V |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.60V |
| On Chip Data RAM | 344kB |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 240-LFBGA |
| Number of Pins | 205 |
| Operating Temperature | -40°C~85°C TC |
| Packaging | Tray |
| Series | TMS320C55x |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 205 |
| ECCN Code | 3A001.A.3 |
| Type | Fixed Point |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 200MHz |
TMS320VC5510AGPHA2 Overview
It is a kind of electronic component available in the 240-LFBGA package.It has a packaging style of Tray.With its association with Fixed Point, it is suitable for a wide range of applications.Surface Mount is the direction in which it is mounted.Keeping the device at the temperature of -40°C~85°C TC will ensure that it runs as it should.In analog circuits, the analog voltage range 3.30V represents the voltage range that is available for input or output.This digital signal processor is part of the TMS320C55x series.In order to use it, it has 205 terminations.It works with a voltage of 1.6V as a supply voltage.Pins are available for 205 components.Its configuration includes 205 pins.The base part number 320VC5510 allows identification of a wide range of related parts.In order for the device to operate at 200MHz frequency, there is a specific design.The mounting method of the device is Surface Mount.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.The minimum voltage supplied to this device is as low as 1.55V.Devices like this can be powered by voltages up to 3.6V.This device is powered by a voltage of 3.3V.Its memory is capable of storing 32kB data.With this electronic part, additional features of ALSO REQUIRES 3.3V SUPPLY can also be provided.
TMS320VC5510AGPHA2 Features
Supplied in the 240-LFBGA package
Operating supply voltage of 3.3V
TMS320VC5510AGPHA2 Applications
There are a lot of Texas Instruments TMS320VC5510AGPHA2 DSP applications.
- Vibration signal processing
- Infinite impulse response filters
- Audio signal
- Digital hardware
- Geophysical processing
- Radar
- Scene analysis technology
- 3D tomography and imaging processing
- Spectral density estimation
- Vehicle electronics
