TMS320VC5510AZGW1
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Weight | 517.293748mg |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.6V |
| Frequency | 160MHz |
| Pin Count | 240 |
| Operating Supply Voltage | 1.6V |
| Power Supplies | 1.63.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.55V |
| Memory Size | 32kB |
| RAM Size | 320kB |
| Memory Type | EPROM, SDRAM, SRAM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Number of Bits | 32 |
| Bit Size | 16 |
| Frequency (Max) | 160MHz |
| Data Bus Width | 32b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 8 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Number of Timers | 2 |
| ROM Programmability | MROM |
| Number of External Interrupts | 6 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Height | 1.4mm |
| Length | 15mm |
| Width | 15mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TMS320VC5510AZGW1 Overview
It is a type of electronic component available in package BGA.For its use, it has 240 terminations.It works with a voltage of 1.6V as a supply voltage.Pins are present on the 240 component.In its configuration, 240 pins can be found.This device is designed specifically to operate at frequency 160MHz.The mounting method of the device is Surface Mount.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.This device operates at a voltage as low as 1.55V.3.6V is the maximum voltage that can be supplied to this device.1.6V is the supply voltage for this device.It can store 32kB data in its memory.There is an electric supply from 1.63.3V.0 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.More additional features of ALSO REQUIRES 3.3V SUPPLY can also be provided by this electronic part.This system uses DIGITAL SIGNAL PROCESSOR, OTHER as its uPs, uCs, and peripheral ICs.Memory type EPROM, SDRAM, SRAM is used by it.A lower operating temperature than 85°C is recommended.Over -40°C, the operating temperature should be maintained.There are 2 timers programmed to provide accurate feedback and event activation in industrial environments.The external source of 6 interrupts is causing 6 interrupts.Data is stored in the device in 32 formats.Below 160MHz, its frequency should be kept at its maximum.Data is transmitted using 8 programmable I/Os.
TMS320VC5510AZGW1 Features
Supplied in the BGA package
Operating supply voltage of 1.6V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
6 external interrupts
TMS320VC5510AZGW1 Applications
There are a lot of Texas Instruments TMS320VC5510AZGW1 DSP applications.
- Consumer electronic gadgets
- Boats
- Voice recognition
- Real-time effects
- Geoscience signal processing
- Fourier transform
- Audio
- Seismology
- Signal processing for telecommunications
- Automatic analysis system of EEG or ECG
