TMS320VC5510AZGW2
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Weight | 517.293748mg |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.6V |
| Frequency | 200MHz |
| Pin Count | 240 |
| Operating Supply Voltage | 1.6V |
| Temperature Grade | OTHER |
| Interface | SPI |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.55V |
| Memory Size | 32kB |
| RAM Size | 320kB |
| Memory Type | EPROM, SDRAM, SRAM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Number of Bits | 32 |
| Bit Size | 16 |
| Frequency (Max) | 200MHz |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Core Architecture | TMS320 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 8 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| ROM Programmability | MROM |
| Number of External Interrupts | 6 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Number of SPI Channels | 1 |
| Height | 1.4mm |
| Length | 15mm |
| Width | 15mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TMS320VC5510AZGW2 Overview
This is an electronic component with a BGA package.In order to use it, it has 240 terminations.It operates with the supply voltage of 1.6V.There are 240 component pins.240 pins can be found in its configuration.In order for the device to operate at 200MHz frequency, there is a specific design.Mounting is accomplished using Surface Mount.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.This device operates at a voltage as low as 1.55V.It can be supplied with a maximum voltage of 3.6V.Using 1.6V as the supply voltage, it operates.There is a memory on this device that can store 32kB data.0 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.A further set of features can be provided by this electronic part for ALSO REQUIRES 3.3V SUPPLY as well.The uPs/uCs/peripheral ICs of the device employ the DIGITAL SIGNAL PROCESSOR, OTHER type.Timer/counters for measuring and counting external events are called 2 timers or counters.TMS320-architecture is used in this processor core.EPROM, SDRAM, SRAM is its memory type.There should be a difference between 85°C and the operating temperature.It is recommended that the operating temperature exceeds -40°C.An external source causes 6 interrupts.The device contains 32 pieces of information.Below 200MHz, its frequency should be kept at its maximum.In this embedded system, 1 SPI channels are used for short-distance communication.There are 8 programmable I/Os used for data transmission.
TMS320VC5510AZGW2 Features
Supplied in the BGA package
Operating supply voltage of 1.6V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
2 timers/counters
6 external interrupts
TMS320VC5510AZGW2 Applications
There are a lot of Texas Instruments TMS320VC5510AZGW2 DSP applications.
- Signal processing for telecommunications
- Biometrics
- Speech processing
- House construction
- Electronic information engineering
- Other sensor array processing
- Boats
- Financial signals
- 3D tomography and imaging processing
- Encoding/broadcast
