Parameters |
Lifecycle Status |
NRND (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Package / Case |
BGA |
Number of Pins |
240 |
Weight |
517.293748mg |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
240 |
ECCN Code |
3A991.A.2 |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
ALSO REQUIRES 3.3V SUPPLY |
Subcategory |
Digital Signal Processors |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
1.6V |
Frequency |
160MHz |
Pin Count |
240 |
Operating Supply Voltage |
1.6V |
Power Supplies |
1.63.3V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.55V |
Memory Size |
32kB |
RAM Size |
320kB |
Memory Type |
EPROM, SDRAM, SRAM |
uPs/uCs/Peripheral ICs Type |
DIGITAL SIGNAL PROCESSOR, OTHER |
Number of Bits |
32 |
Bit Size |
16 |
Frequency (Max) |
160MHz |
Data Bus Width |
32b |
Boundary Scan |
YES |
Low Power Mode |
YES |
Number of Programmable I/O |
8 |
Format |
FIXED POINT |
Integrated Cache |
YES |
Number of Timers |
2 |
ROM Programmability |
MROM |
Number of External Interrupts |
6 |
Barrel Shifter |
NO |
Internal Bus Architecture |
MULTIPLE |
Height |
1.4mm |
Length |
15mm |
Width |
15mm |
Thickness |
900μm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
TMS320VC5510AZGWA1 Overview
This is an electronic component with a BGA package.The uses of this product can be terminated with 240.1.6V is the supply voltage.Pins are available for 240 components.Its configuration includes 240 pins.In order for the device to operate at the frequency of 160MHz, it has been designed specifically.As a mounting method, it uses Surface Mount.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.This device can be powered by voltages as low as 1.55V.3.6V is the maximum voltage that can be supplied to this device.A voltage of 1.6V is used as the supply voltage.This device is able to store 32kB data in its memory.Electricity is supplied by 1.63.3V.It is possible to configure the data format and transfer speed of 0 UART channels for synchronous serial communication.It can also provide more features of ALSO REQUIRES 3.3V SUPPLY.A DIGITAL SIGNAL PROCESSOR, OTHER type UP/UC/Peripheral IC is employed in its uP/UC/Peripheral ICs.The memory type it uses is EPROM, SDRAM, SRAM.It is recommended that the operating temperature be lower than 85°C.It should operate at a temperature greater than -40°C.In industrial environments, 2 timers are programmed to provide accurate feedback.An external source causes 6 interrupts.On the device, there is 32 information.Below 160MHz is the maximum frequency that should be used.Data is transmitted using 8 programmable I/Os.
TMS320VC5510AZGWA1 Features
Supplied in the BGA package
Operating supply voltage of 1.6V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
6 external interrupts
TMS320VC5510AZGWA1 Applications
There are a lot of Texas Instruments TMS320VC5510AZGWA1 DSP applications.
- Digital image processing, data compression
- House construction
- Seismology
- Streaming music
- Signal processing for telecommunications
- Airplanes
- Radar
- Infinite impulse response filters
- Speech processing and recognition
- Receivers