TMS32C6205DGHKA200
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 288 |
| Weight | 613.200185mg |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 288 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 200MHz |
| Pin Count | 288 |
| Operating Supply Voltage | 1.5V |
| Power Supplies | 1.53.35V |
| Temperature Grade | INDUSTRIAL |
| Interface | PCI |
| Max Supply Voltage | 3.46V |
| Min Supply Voltage | 1.43V |
| RAM Size | 128kB |
| Memory Type | EPROM, SDRAM, SRAM |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Number of Bits | 32 |
| Bit Size | 32 |
| Frequency (Max) | 200MHz |
| Data Bus Width | 32b |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| RAM (words) | 16384 |
| Number of Timers | 2 |
| Number of External Interrupts | 4 |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Number of DMA Channels | 4 |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TMS32C6205DGHKA200 Overview
It is a type of electronic component available in package BGA.The 288 terminations are used for its uses.The supply voltage is 1.5V.Pins are available on the 288 component.In its configuration, 288 pins can be found.The device is specifically designed to operate at the frequency of 200MHz.Using Surface Mount as a mounting method, it is mounted.As a result of its specific characteristics, this device can be classified under the Digital Signal Processors subcategory.It is possible to supply as low a voltage as 1.43V to this device.This device can be powered by 3.46V voltages.This device is powered by 1.5V's supply voltage.Electricity is supplied by 1.53.35V.Using this electronic part, ALSO REQUIRES 3.3V SUPPLY can also have additional features.This device utiliDIGITAL SIGNAL PROCESSOR, OTHERes the DIGITAL SIGNAL PROCESSOR, OTHER type of uPs, uCs, and peripheral ICs.It uses the EPROM, SDRAM, SRAM memory type.It is recommended to operate at a lower temperature than 105°C.It should operate at a temperature greater than -40°C.In industrial settings, 2 timers provide accurate feedback and event activation.External sources are causing 4 interrupts.Data is stored in the device in 32 formats.Below 200MHz is the maximum frequency that should be used.The CPU is not overloaded by data transfer via 4 DMA channels.
TMS32C6205DGHKA200 Features
Supplied in the BGA package
Operating supply voltage of 1.5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
TMS32C6205DGHKA200 Applications
There are a lot of Texas Instruments TMS32C6205DGHKA200 DSP applications.
- Computers and laptop
- Instrument modeling
- Seismology
- Digital communications
- House construction
- Vibration signal processing
- Audio compression
- Streaming music
- Sonar
- Automobile electronic gadgets
