TMUX1204DGSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TMUX1204 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Bandwidth | 125MHz |
| -3db Bandwidth | 125MHz |
| On-State Resistance (Max) | 5Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 75nA Typ |
| Channel Capacitance (CS(off), CD(off)) | 13pF 38pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 14ns (Typ), 5ns (Typ) |
| Charge Injection | 9pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -42dB @ 10MHz |
| Switch-on Time-Max | 20ns |
| Switch-off Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.08V~5.5V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
TMUX1204DGSR Overview
This electronic part is conveniently packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. 4:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~125°C TA. Total terminations are 10. A high-quality output is provided by the electrical component's 2 channels. With a 5V voltage supply, the electrical component should be turned on and run. A SP4T switching circuit is used for these analog switches. It consists of 1 circuits. Try searching with TMUX1204 to find analog multiplexer variants. This analog switch requires a voltage of 1.08V~5.5V to drain from a single voltage supply. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. This switch operates within the bandwidth of 125MHz.
TMUX1204DGSR Features
2 Channels
Switch Circuit: SP4T
-3db Bandwidth: 125MHz
Bandwidth: 125MHz
TMUX1204DGSR Applications
There are a lot of Texas Instruments TMUX1204DGSR Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Audio and video routing
- Data Acquisition Systems
- USB 1.1 signal switching circuits
- Mechanical reed relay replacement
- Frame Relay Equipment
- Medical
- Routers
- Switching Systems
- PCMCIA cards
