TMUX136RSER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TMUX136 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 4.8V |
| Min Supply Voltage | 2.3V |
| Nominal Supply Current | 30μA |
| Bandwidth | 6100MHz |
| Supply Current-Max (Isup) | 0.05mA |
| -3db Bandwidth | 6.1GHz |
| On-State Resistance (Max) | 9.5Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 1.6pF 1.6pF |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -37dB @ 240MHz |
| Voltage - Supply, Single (V+) | 2.3V~4.8V |
| Ambient Temperature Range High | 85°C |
| Signal Current-Max | 0.1A |
| Height | 600μm |
| Length | 1.5mm |
| Width | 2mm |
| Thickness | 550μm |
| RoHS Status | ROHS3 Compliant |
TMUX136RSER Overview
Shipping overseas is convenient due to the electrical component's packing in 10-UFQFN. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 10. The electronic part provides high-quality output because it has 2 channels. Based on SPDT switching circuits, these analog multiplexers work. The multiplexer consists of 2 circuits. Look for analog switch ic variants by searching with TMUX136. You can find the functions of the 10 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 4.8V. It is recommended that the electrical component receives a voltage of 2.3V. The voltage required by this switch device is 2.3V~4.8V, draining from a single voltage supply. There are various bandwidths available for data transfer.
TMUX136RSER Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 6.1GHz
Bandwidth: 6100MHz
TMUX136RSER Applications
There are a lot of Texas Instruments TMUX136RSER Analog Switches & Multiplexers ICs applications.
- DVD-R
- Access Concentrators
- Voice over IP/DSL – Integrated Access Devices, Smart
- Battery Powered Systems
- Fiber In The Loop (FITL)
- Routers
- Digital cross connects (DSX-1)
- Mechanical reed relay replacement
- Battery Powered Instruments
- Microprocessor Controlled Analog Systems
