TMUX6113PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| Base Part Number | TMUX6113 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 10V~16.5V ±5V~16.5V |
| Bandwidth | 380MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 800MHz |
| On-State Resistance (Max) | 160Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 1.9pF 2.4pF |
| On-state Resistance Match-Nom | 2.5Ohm |
| Switch Circuit | SPST |
| Switch Time (Ton, Toff) (Max) | 78ns, 68ns |
| Charge Injection | 0.6pC |
| Channel-to-Channel Matching (ΔRon) | 2.5 Ω |
| Crosstalk | -100dB ~ -115dB @ 1MHz |
| Switch-on Time-Max | 117ns |
| Switch-off Time-Max | 81ns |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | RoHS Compliant |
TMUX6113PWR Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Cut Tape (CT) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. There are 16 terminations totally. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. A SPST switching circuit is used to build these analog multiplexers. There are 4 circuits in this multiplexer. Look for analog switch ic variants by searching with TMUX6113. A 380MHz-bandwidth can be used for data transfer.
TMUX6113PWR Features
1 Channels
Switch Circuit: SPST
-3db Bandwidth: 800MHz
Bandwidth: 380MHz
TMUX6113PWR Applications
There are a lot of Texas Instruments TMUX6113PWR Analog Switches & Multiplexers ICs applications.
- Avionics
- Microprocessor Controlled Analog Systems
- PBX interfaces
- Precision data acquisition
- E1 Network Equipment
- HDTV
- DVD-R
- FTTH
- Avionics and Military Systems
- Low-Voltage
