TMUX6122DGSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TMUX6122 |
| JESD-30 Code | S-PDSO-G10 |
| Supply Voltage-Min (Vsup) | 5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Bandwidth | 630MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 630MHz |
| On-State Resistance (Max) | 165Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 85 dB |
| Neg Supply Voltage-Max (Vsup) | -16.5V |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 1.9pF 2.2pF |
| On-state Resistance Match-Nom | 2.4Ohm |
| Switch Circuit | SPST |
| Switch Time (Ton, Toff) (Max) | 86ns, 76ns |
| Charge Injection | 0.51pC |
| Channel-to-Channel Matching (ΔRon) | 2.4 Ω |
| Crosstalk | -110dB @ 1MHz |
| Switch-off Time-Max | 85ns |
| Neg Supply Voltage-Min (Vsup) | -5V |
| Voltage - Supply, Dual (V±) | ±5V~16.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
TMUX6122DGSR Overview
This electronic part is conveniently packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Cut Tape (CT) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to -40°C~125°C TA. A total of 10 terminations have been recorded. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. On the other hand, analog switches can be constructed using SPST switching circuits. A total of 2 circuits make up this switch device. Try searching for the analog switch ic with TMUX6122 if you are looking for variants. It is possible to transfer data over a 630MHz-bandwidth. Providing power to the analogue multiplexer requires a voltage of 5VV.
TMUX6122DGSR Features
1 Channels
Switch Circuit: SPST
-3db Bandwidth: 630MHz
Bandwidth: 630MHz
TMUX6122DGSR Applications
There are a lot of Texas Instruments TMUX6122DGSR Analog Switches & Multiplexers ICs applications.
- DSUs
- Imaging
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Fiber to the Home
- Switching Systems
- MP3 players
- Medical
- Communications systems
- RGB switches
- New designs requiring multiplexer functions
