TMX320C6455ZTZ

0.8mm 1.21.5/1.81.83.3V CPLD 697 Pin 1GHz 1.8V FCBGA

Manufacturer: Texas Instruments
Nocochips NO: 815-TMX320C6455ZTZ
Package: FCBGA
Datasheet: -
Stock: 687
Description: 0.8mm 1.21.5/1.81.83.3V CPLD 697 Pin 1GHz 1.8V FCBGA (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Package / Case	FCBGA
Number of Pins	697
Number of Terminations	697
ECCN Code	3A001.A.3
Max Operating Temperature	90°C
Min Operating Temperature	0°C
Additional Feature	ALSO REQUIRES 3.3V SUPPLY
HTS Code	8542.31.00.01
Subcategory	Digital Signal Processors
Technology	CMOS
Terminal Position	BOTTOM
Terminal Form	BALL
Supply Voltage	1.8V
Terminal Pitch	0.8mm
Frequency	1GHz
Pin Count	697
Power Supplies	1.21.5/1.81.83.3V
Max Supply Voltage	3.46V
Min Supply Voltage	1.1875V
uPs/uCs/Peripheral ICs Type	DIGITAL SIGNAL PROCESSOR, OTHER
Bit Size	32
Frequency (Max)	1GHz
Data Bus Width	32b
Address Bus Width	16
Boundary Scan	YES
Low Power Mode	YES
Format	FIXED POINT
RAM (words)	32768
Barrel Shifter	NO
Internal Bus Architecture	MULTIPLE
Height Seated (Max)	3.3mm
Length	24mm
Radiation Hardening	No
RoHS Status	RoHS Compliant

TMX320C6455ZTZ Overview

This is an electronic component with a FCBGA package.The uses of this product can be terminated with 697.1.8V provides the supply voltage for it.697 component pins are present.Its configuration includes 697 pins.The device is specifically designed to operate at the frequency of 1GHz.In order to mount it, it utiliSurface Mountes the Surface Mount method.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.It is possible to supply as low a voltage as 1.1875V to this device.The maximum voltage for this device is 3.46V.1.21.5/1.81.83.3V electric power supplies it.A further set of features can be provided by this electronic part for ALSO REQUIRES 3.3V SUPPLY as well.DIGITAL SIGNAL PROCESSOR, OTHER is used as the uPs/uCs/peripheral IC type.90°C should be lower than the operating temperature.0°C should be exceeded as the operating temperature.Below 1GHz, its frequency should be kept at its maximum.