TN80C186XL20
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Number of Terminations | 68 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS; NUMERIC COPROCESSOR INTERFACE |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Access Time | 20 μs |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 5 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 4.83mm |
| Length | 24.2316mm |
| Width | 24.2316mm |
| RoHS Status | Non-RoHS Compliant |
TN80C186XL20 Overview
Due to its PLCC packaging, it is convenient to ship overseas. A high level of reliability is provided by using an advanced packaging method Bulk. uPs/uCs/Peripheral ICs are a MICROPROCESSOR. Total terminations are 68. With a 5V voltage supply, the part should be turned on and run. It is an architecture with 16 bits. CPUs operate at 20MHz Hz. The datasheets for 68 pins provide details. Microprocessors is a typical embedded microprocessor. The external data bus width of this CPU is 16. It is recommended that the CPU microprocessor is not operated in an environment with a temperature of more than 70°C. Micro processor body consists of 68 pins. This CPU is widely used in many applications because of its Surface Mount mount. It is possible to use the micro processor from 5V. As specified in datasheets, the embedded microprocessor requires 5V power supplies. There is 5V voltage at the CPU core. Voltage can't exceed 90mA to the CPU. normally, the microprocessor should not receive a voltage higher than 5.5V. The lowest voltage that should be applied to the micro processor is 4.5V. The microprocessor has additional features, such as DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS; NUMERIC COPROCESSOR INTERFACE. There are 5 external interrupt terminations due to hardware interrupts. DMA (Direct Memory Access) is programmed with 2 channels.
TN80C186XL20 Features
16-Bit Structure
TN80C186XL20 Applications
There are a lot of Intel TN80C186XL20 Microprocessor applications.
- Blenders
- Instrumentation and process control field
- Digital TVs
- Speed meter
- Heart rate monitors
- Process control devices
- Dialysis machines (performs function of liver)
- Air fryers
- Playstation
- Scanners
