TNY253P
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TinySwitch® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 2W |
| Max Power Dissipation | 2W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 140μA |
| Control Features | EN |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Frequency - Switching | 44kHz |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Max Duty Cycle | 68 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 4.45mm |
| Length | 9.59mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TNY253P Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.Tube case is available for the ac dc converter.As you can see, this AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .When the switching frequency reaches 44kHz , the process is complete.Total terminations are 8 .A ac/dc converter with 8 pins is available.There are 8 pins in the ac-dc converter.It is a member of TinySwitch? manufacturer family.It produces a voltage of 5.8V .An amount of current of 0.4A can be supplied to the ac to dc inverter.Across the converter, the minimum supply voltage is 85V .The maximum supply voltage across the converter is 265V .
TNY253P Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at 44kHz
With 8 pins
TNY253P Applications
There are a lot of Power Integrations TNY253P AC DC Converters applications.
- Small off-line low voltage power supplies
- Tablets
- MPS parts
- Appliances
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Power adapters for network devices
- Dimmers
- Universal Off-Line Power Supplies
- Standby power supplies for VCR
- Power adapters for monitors
